Hedge Trimmer Guide

How to operate a hedge trimmer

The electric hedge trimmer is the most commonly used in the UK. While petrol and battery operated hedge trimmers are available, electric trimmers are popular, due to their relatively low cost and ease of use. Using a hedge trimmer is relatively simple and generally just requires some common sense.
Before you start

First off check the weather. Never cut your bushes or hedges in the rain. This is especially important when using an electric hedge trimmer. This is basic safety advice when using any electric power tool, not just hedge trimmers – remember water and electricity does not mix!

If the weather is fine to work in, check your equipment is in good working order and not damaged in any way. If your hedge trimmer is damaged you should either have it fixed by a trained professional or buy a new one. Hedge trimmers are readily available to buy in the UK in most retailers or garden centres. If using an electric hedge trimmer ensure you have enough cable to reach where you need to go. If the standard cable that comes with the hedge trimmer is not long enough, you can attach an extension lead. Never use more than one extension cable at one time.

Next check that the environment you are about to work in. Is it safe? Are there children or pets running around the garden? If so, rope or mark off an area or safe zone so that they cannot enter where you will be using the hedge trimmer. This will prevent them knocking you when cutting your hedges and hurting you or themselves.

Ensure you are wearing appropriate clothing and footwear. The clothing you chose to wear should allow you to move freely, be sturdy and tight fitting. This should provide some protection if required and be out the way, allowing you to see clearly where you are cutting and to avoid them getting snagged on branches as you cut. You should also wear study non-slip shoes to provide you with a strong footing when using your hedge trimmer. Goggles and gloves are also recommended.

The last thing you need to do is go outside and pick out any dead leaves or debris that may be stuck in your hedge. This will stop debris from jamming your hedge trimmer and make cutting a whole lot easier.

How to cut your hedge 

Now you and your hedge trimmer are ready to start work. Move towards your hedge and stand a comfortable distance away gaining a shore footing. If you are using an electric hedge trimmer ensure the cord is behind you and out of the way. By cutting away from the power source it will ensure the cable is always trailing away from you.

Holding the hedge trimmer in two hands, turn on your hedge trimmer and begin cutting the hedge or bush from the bottom up in a circular motion. This should help sweep the branches away from the hedge and allow you to see where you are cutting next. Work at a speed that is comfortable and take your time. Accidents often happen when people rush things.

If your hedges are large or require a lot of trimming, you may prefer to tidy as you go. By placing a sheet on the floor before you start, allows you to easily collect the cuttings in one place. You can then easily pick them up to dispose of them in your garden waste bin, or add them to your compost heap.

When you get round to cutting the top of the hedge, hold the hedge trimmer straight out in front of you and cut using a sideway motion to get a nice tidy finish.

If cutting taller hedges and are using a hedge trimmer with a telescopic pole like the Flymo SabreCut, you will need to extend the pole to the appropriate height and tilt the blade to a 90 degree angle. When using this take care and avoid any falling debris as you are cutting.

After cutting 

After cutting your hedges it is important that you clean your hedge trimmer. During cutting it is likely that sap and debris from the bushes has become stuck in the blades and teeth. Leaving this debris in the hedge trimmer will make it more difficult and less efficient for your trimmer to cut the hedges next you need to do it.

Turn off the machine and place it on a suitable work surface. Gentle remove any loose debris and, clean the blade following the manufacturers guidance. If you are using a petrol hedge trimmer you may be required to lubricate the teeth with appropriate oil. Always follow the manufacturer’s advice when cleaning the product to maintain its warranty.

Chainsaw chain types

A chainsaw is a portable mechanical saw that is powered by electricity, or most commonly – a two-stroke engine. It is mainly used to fell and prune trees, in clearing foliage and removing branches, in assisting to cut fire brakes and harvest wood for fire. In Finland, chainsaws are used to cut ice for winter swimming.

Only specialists with particular training can handle a chainsaw. In inexperienced hands, chainsaws can lead to horrible accidents and deaths.Unless someone is a professional and has experience with handling a chain saw, it is very easy to be confused about the different types of chainsaw chains. Here are the different types of chainsaw chains described and differentiated.

Full Chisel Chains cuts through all types of wood faster than any other chain types, and needs more careful sharpening. However, they dull faster, especially if used to cut soft woods. Their only distinction is that they cut faster.
Semi Chisel Chains take longer to dull than Full Chisel chains when used on soft wood.
Ripping Chains are special purpose chains with shallow-angle cutters that are used in chainsaw mills and in cutting out planks from wood. It specialized in giving the planks a smooth finish due to the angle cutters.
Skip Chains works with at least a 66cc chainsaw, or bigger. There are two blank links between the cutters in this type of chain, and is therefore able to take bigger bites of wood in one cut. However, this requires more pressure on the saw, and as a result needs more power. Larger gaps mean less clogging of chain and of course, more clearance of the waste materials.
Square Ground Chains are for professional use, and sharpen with a type of flat file; more commonly, a triangular file. It is very fast, but a real pain to sharpen.

In a nutshell, it can be said that, depending on the wood, it is better to decide on a full or semi-chisel chain for amateur work. Do not go for a Ripping Chain unless you have a sawmill to use in at, or a Square Ground Chain if you are not a professional. Handle your chainsaw with extreme care; it is a dangerous tool.

Starting a Timberpro 58cc Petrol Chainsaw

Starting a chainsaw is a task that not many new chainsaw buyers think of when going to buy their first ever chainsaw and with good reason right? I mean you just have to flick a switch or pull a cord right?

No...

A bit like trying to start a car for the first time, it is not as easy as it looks, unless you know exactly what you are doing in which case it is pretty easy. The purpose of this article is to ahoq you exactly what you are doing with the timberpro 58cc petrol chainsaw so it can be pretty easy for you/

If you start the video at 3:18 that will take you straight to starting the chainsaw! However a lot of other helpful information is available via the timberpro youtube channel!

Identifying the Parts of a Chainsaw

Before you even think about touching a chainsaw you gotta know what you are actually touching. A chainsaw isn't a toy and knowledge can keep you safe from harm while operating a chainsaw, not to mention this is the basics of basics for a lot of chainsaw maintenance. To  make things a little easier we have down a quick picture for you identifying the parts:

and now that we have identified the chainsaw parts we just need to know what they all contribute to the machine which this excellent blog post "Chainsaw Parts Explained" ahem explains,

How to use a Power Auger

For the experienced practitioner this can seem like a bit of a daft question but to the struggling novice this may be a life - or arm - saving article. I think the best way of starting this article is to just have a look at the different types of augers on the market.

             

The Power Auger

           

A power auger is a very powerful machine as the name suggests and another pair of strong hands may be required to control the machine. Needless to say the power auger is very effective at digging holes quickly but this does not mean it will be a walk in the park and there will be a lot of physical exertion with this particular machine.

 

Method:

   

1. Dig a pilot hole
2. Position the power with the help of a friend if it is a two person auger
3. Turn on the machine and slowly increase the throttle
4. Be careful not to dig too deep!

Health & Safety

Thee items of clothing that you should definitely be wearing when operating a power auger:

 

1. Steel Toe Boots
2. Leather Gloves
3. Protective Eye Wear

All the clothing is pretty obvious for why you should wear it but the eye wear cannot be stressed enough. Stones and other bits of debris can shoot up and if one of those hits you in the eye, its not worth thinking about. Wear the glasses if nothing else.

Digging up Your Garden DIY Style

Digging up Your Garden DIY Style

Digging up your garden isn't especially tricky and anyone with a little bit of knowledge and work ethic can get it done with minimal training and expertise. This really begs the question why hire a gardener who will charge x amount per hour when on a Sunday you can really just dig in and get it done yourself. 

Well the reason is if you make mistakes it can leave your garden looking a right mess. So I am here to talk you through how to dig up your garden DIY style!

When to dig

Digging the soil is essential for good plant growth. If the soil condition is poor organic matter can be added at the same time as digging. The best time to dig is from October through December, when the soil is free of frost and can be left to overwinter. From mid-winter until early spring, the ground is frequently wet or frozen and difficult to work with. Heavy soil must never be dug when it's wet as this can damage the soil structure and lead to poor aeration and drainage.

The depth of your topsoil, quality of drainage and whether or not your plot has been previously cultivated, will all determine the digging method required. Single and double digging are the most effective and labour-efficient digging techniques. Before digging, make sure the site is clear of all persistent weeds.

How to dig

The depth of your topsoil, quality of drainage and whether or not your plot has been previously cultivated, will all determine the digging method required. Single and double digging are the most effective and labour-efficient digging techniques. Before digging, make sure the site is clear of all persistent weeds.

Keep an eye for future articles on different techniques with which to dig up your garden! For all your gardening tool equipment please check out our sponsors Timberpro!